Products: Switchboard Hardware

Busbar Chassis Assemblies

Features

• 250A rated pressed one piece copper
• Double polyethylene insulated in phase colours
• 20kA, 0.2s type tested
• Accommodates 2 rows of vertically mounted SFM breakers and RCBO's

Features

• 250A rated pressed one piece copper
• Double polyethylene insulated in phase colours
• 20kA, 0.2s type tested
• Accommodates 2 rows of horizontally mounted SFM breakers and RCBO's
• RCBO’s cannot be mounted on the top row
• Breaker toggles operate in same direction

Features

• 315A and 400A rated
• Double polyethylene insulated in phase colours
• 20kA, 0.4s and 16kA, 0.5s type tested (315A)
• 20kA, 1.0s type tested (400A)
• Accommodates 2 rows of vertically mounted SFM breakers and RCBO's

Features

• 250A rated
• Double polyethylene insulated in phase colours
• 20kA, 0.2s type tested
• Accommodates 1 row of horizontally mounted SFM breakers RCBO's
• Vertical mount with busbars on RHS (optional)
• Vertical mount with busbars on LHS (special order)

Features

• 440V, 800A main busbars with 250A T-offs
• Double polyethylene insulated in phase colours
• 50kA, 1.0s type tested
• Accomodates two rows of vertically mounted SK breakers
• Can be inverted for bottom mains entry
• Available as single sided

Features

• Accomodates two rows of QF18 MCBs and QF10 RCBOs in a vertical configuration with conventional 'load' side terminals of MCB to T-off
• 250A rated fully enclosed busbars with IP2X protection for all outgoing circuits
• Break off IP2X protection caps for T-off access
• Type tested to AS/NZS 3439.1 20kA for 0.2s
• Optional neutral busbar 12kA for 0.1s
• 50kA with 200A back-up fuses

Separate Busbar Assemblies