CBI Electric: Australia

SPB

Applications

  • For accommodating SF type hydraulic-magnetic circuit breakers for electricity distributor consumer mains protection

Features

  • Oval design allows more space for wiring
  • Accepts up to three single pole SF type miniature circuit breakers
  • Cable entry knock outs in bottom
  • Up to three operating slides can be fitted for independent circuit breaker operation
  • Slide can be operated with hook stick
  • Circuit breaker terminals accept up to 50mm2 cable
  • Fully weather proof, UV stabilised and flame retardent polypropylene material
  • Universal mounting bracket suitable for bolting or banding to pole

HLR3

Applications

  • Provides under voltage sensing and voltage sensing for up to three lighting circuits, together with control, timing, test and reset functions for emergency escape lighting and exit signs in buildings in accordance with the appropriate clauses of AS 2293.1-2005 (1) and as defined in the Building Code of Australia.

Features

  • DIN rail mounting for incorporating into distribution switchboards
  • Available in self contained enclosure with N-C contactor and lockable hinged door
  • Provision for sensing up to three 240V lighting circuits (can be different phases on HLR3)
  • TEST button simulates lighting circuit failure and automatic two hour minimum (battery discharge) time delay
  • RESET button aborts test function
  • LED indication for POWER ON, TEST IN PROGRESS, SUPPLY/SENSING LESS THAN 180V and RESETTING functions

QKL

Applications

  • For surge protection on incoming power supplies against surges originating as a result of atmospheric discharges (lightning) and switching operations
  • Neutral pole required for applications with no MEN link

Features

  • IEC 61643-1 approved
  • Clip-in, dual mounting
  • LED indication of the SPD’s condition – whilst ON, the SPD is functional, if OFF and the mains power is still available, then the SPD is no longer functional and should be replaced
  • Thermal disconnect device (prevents potential thermal runaway problems)

HLR12

Applications

  • Provides under voltage sensing and voltage sensing for up to 12 lighting circuits, together with control, timing, test and reset functions for emergency escape lighting and exit signs in buildings in accordance with the appropriate clauses of AS 2293.1-2005 (1) and as defined in the Building Codeof Australia.

Features

  • DIN rail mounting for incorporating into distribution switchboards
  • Available in self contained enclosure with N-C contactor and lockable hinged door
  • Provision for sensing up to 12 x 240V lighting circuits (can be different phases)
  • TEST button simulates lighting circuit failure and automatic two hour minimum (battery discharge) time delay
  • RESET button aborts test function
  • LED status to each sensing circuit condition i.e.: ON or OFF
  • LED indication for LIGHTING CIRCUIT FAILURE and TEST IN PROGRESS
  • Selectable 10 second or 10 minute reset delay following restoration of normal supply to all sensing circuits.10 minute delay can eliminate the need for immediate restrike lighting

ECOLEC

Applications

  • Manual meter reading – A space saving cost effective kWh check meter for domestic, commercial and industrial application, eg. caravan parks, hostel accommodation, plant/process energy measurement, mobile generating sets.
  • Bulk metering – Suitable for use with external CT’s for 1, 2 or 3 phase applications.

Features

  • IEC 61036 Class 2 compliance
  • Operates correctly when reverse fed
  • DIN rail mounting and aperature
  • Compact 13mm modular width
  • Consumption indicator (LED). Also doubles as a power available and system failure mode indicator
  • Sealable phase coloured terminal covers
  • Full EMC compliance